edited and annotated by Gregory J. Rosmaita
revision date: 2007-12-16
Generalized content markup (such as HTML) is complimented by markup specifications that facilitate more semantically precise content markup. Examples of specialized, semantically precise markup include MathML and MusicXML. Assistive technology (AT) typically handles generalized content markup, but does not know about specialized markup. Because of this, users of AT are unable to access or navigate specialized markup effectively.
The Open A11y Expert Handlers SIG is exploring a standardized plug-in mechanism to AT software. The goal of this plug-in standard is to allow AT software to take advantage of expert software that understands specialized markup. This plug-in standard will allow the expert software to provide enhanced, semantically rich access to specialized markup so that the AT can properly render (visually, aurally, and/or tactilely) and help users navigate the semantic meaning encoded in the specialized markup.
Use Case Author: Vladimir Bulatov
An Expert Handler should be able to provide braille data for braille display output by generic Assisstive Technology (AT). Custom braille output is needed, because generic AT has no knowledge about how specific specialized data can and should be represented via braille. An example is MathML: there are many different braille codes used to represent mathematics that vary from country to country and agency to agency.
An Expert Handler should also provide a means to allow a user to select a different type of braille conversion than that which is normally utilized by a user's refreshable braille display or a tactile graphic achieved via embossing or thermal printing.
There is a finite number of possible braille dot patterns because there are only 6 or 8 possible dots per Braille symbol. Simple ASCII strings are usually used to communicate Braille. However, there are a lot of specific ASCII-to-dots pattern-encoding used to generate braille that conforms to a natural language's braille conventions.
A far more efficient means of communicating braille patterns to a refreshable braille display or a braille embosser, therefore, is to use the Unicode symbols from
0x28FF to communicate the braille pattern to the AT. Alternatively, an Expert Handler could communicate via a braille table to AT or could request a specific, specialized Braille table be loaded in-process for use by the AT.
There is also a need to have braille output tailored to various level of granularity. For example, at a low level of granularity, the user would receive an overall description of the mathematical expression or image, while at the highest level of granularity, the user would receive a complete braille translation of the whole math expression or list of all labeled components of the image.
Some data may need to be expressed in a more advanced tactile output format than refreshable braille. For example, graphical data would greatly benefit from being embossed on paper or a 2D braille display. Input devices, such as a touchpad or camera, which allow a user to communicate to the computer which parts of the graphic the user is interested in and needs tactilely displayed. Such an interactive functionality should be left exclusively to the Expert Handler. This means, that an Expert Handler must have an interactive mode and a way for an AT to trigger/toggle this mode on. In such a mode, an AT should also provide a way for the Expert Handler to produce more than one output stream – such as simultaneous speech and braille output – directly via an AT device which uses the same TTS engine or/and braille display.
Use Case Author: Neil Soiffer
The most obvious use of magnification is for rendering the entire content larger. For text-based (or more generally, font-based) applications, this means that Assistive Technology (AT) software should be able to request rendering with larger sized fonts or a certain amount of magnification relative to some baseline magnification. Applications beyond standard text-based ones include math, music, and labeled plots/graphics. For non text-based applications such as graphics and chemical structures, magnification could be based on a certain percentage of the normal size or given by “fill this area”. I believe these two ideas can always be mapped onto each other. In all of these cases, the magnification may be due to having the entire documented magnified or it may be due to a request to magnify an individual instance (such as an equation).
There are two other uses for magnification:
Although the rendering would not be consider high quality typesetting, it does make scripts more readable to those with some vision impairment.
Use Case Author: Janina Sajka
Computer users who are blind or severely visually impaired often use assistive technology (AT) built around synthetic text to speech (TTS). These AT applications are commonly called “screen readers.” Screen reader users listen to a synthetic voice rendering of on screen content because they are physically unable to see this content on a computer display monitor.
Because synthetic voice rendering is intrinsically temporal, whereas on screen displays are (or can easily be made) static, various strategies are provided by screen readers to allow users to tightly control the alternative TTS rendering. Screen reader users often find it useful, for instance, to skim through content until a particular portion is located and then examine that portion in a more controlled manner, perhaps word by word or even character by rendered character. It is almost never useful to wait for a synthetic voice rendering that begins at the upper left of the screen and proceeds left to right, row by row, until it reaches the bottom because such a procedure is temporally inefficient, requiring the user to strain to hear just the portion desired in the midst of unsought content. Thus, screen readers provide mechanisms that allow the user to focus anywhere in the content and examine only that content which is of interest.
Screen readers have proven highly effective at providing their users access to content which is intrinsically textual and linear in nature. It is not hard to provide mechanisms to focus synthetic voice rendering paragraph by paragraph, sentence by sentence, word by word, or character by character.
Access to on screen widgets have also proven effective by rendering that static content in list form, where the user can pick from a menu of options using up and down arrow plus the enter key to indicate a selection, in liue of picking an icon on screen using a mouse.
Access to content arrayed in a table can also succeed by allowing the AT to simulate the process a sighted user employs to consider tables. In other words, mechanisms are provided to hear the contents of a cell and also the row and column labels for that cell (which define the cell's meaning).
Similar “smart” content rendering and navigation strategies are required by screen reader users in more complex, nonlinear content such as mathematical (chemical, biological, etc) expressions, music, and graphical renderings. Because such content is generally the province of knowledge domain experts and students, and not the domain of most computer users, screen readers do not invest the significant resources necessary to serve only a small portion of their customer base with specialized routines for such content. Furthermore, the general rendering and navigation strategies provided for linear (textual), menu, and tabular content are woefully insufficient to allow users to examine specific portions of such domain specific expressions effectively. On the other hand domain specific markup often does provide sufficient specificity so that the focus and rendering needs of the screen reader can be well supported.
In order to gain effective access to such domain specific content screen reader users require technology that can:
Note: The Navigability section will need to address multiple levels of navigability. The following describes the most generic layer of navigability.
Assisstive Technology (AT) users need to be able to navigate within sub-components of documents containing specialized content, such as math, music or chemical markup. Typically these specialized components have content which needs to receive “focus” at different levels of granularity, e.g. a numerator within a numerator, an expression, a term, a bar of music, etc.
Within each level, functions are needed in response to AT commands to inspect and navigate to and from “items” (e.g., by word, bar, expression, clause, term, depending upon the type of content being expressed) for a particular level of granularity:
There are two scenarios to consider, a read-only scenario and a scenario where the user is editing the document.
There are three system components that need to interact: the user agent, e.g. a browser, the AT, and the plugin/handler.
In the read-only case, the AT responds to some sort of “Point of Regard” change event and depending on the “role” of the object which received focus, the AT fetches accessibility information pertinent to that role and then formats/outputs a response tailored to an AT user, e.g. TTS/Braille. In the case of specialized content, a handler needs to be used by the AT because the AT doesn't know how to deal with such specialized content directly.
In order to meaningfully interact with the specialized content, the user needs to be able to execute the following actions:
In the case of editable content there may also be a desire to have separate cursors, e.g. one to remain at the POR (the caret, if editing), and one to move around for review purposes.
The AT will already have UI input commands for most of the above functions, but probably not for changing to higher/lower levels of granularity. Let's assume ATs add that and in response the AT would call the handler to change the mode of granularity. The AT will handle the UI commands and in turn call the handler to return an item at the current level of granularity. The AT would have told the handler about the output mode, e.g. Braille or TTS. Armed with those three things: level of granularity, mode of output, and which item (first, last, previous, current, next), the handler knows what to do.
In the case of editable content, the UA provides the input UI for the user. This editing capability would most likely be provided via a plugin. We need an example of such a plugin so we can evaluate what a11y features need to be added to the existing editors.