civilinfrastructureplatform:ciptesting:cipreferencehardware:hihope-rzg2m:hihope-rzg2mbuildinstructions
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
civilinfrastructureplatform:ciptesting:cipreferencehardware:hihope-rzg2m:hihope-rzg2mbuildinstructions [2019/10/01 07:41] patersonc [Build Steps] Fixed configuration |
civilinfrastructureplatform:ciptesting:cipreferencehardware:hihope-rzg2m:hihope-rzg2mbuildinstructions [2019/11/05 02:14] kanechikay [Table] fix minor mistake of the image format type |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Renesas RZ/G2M hihope-rzg2m build instructions ====== | ====== Renesas RZ/G2M hihope-rzg2m build instructions ====== | ||
| + | |||
| + | This page describes how to build following images/tools for Renesas RZ/G2M hihope-rzg2m. | ||
| + | * the latest CIP kernel | ||
| + | * the full hihope-rzg2m BSP from Renesas (including loader, U-Boot, kernel based on CIP kernel and rootfs) | ||
| + | * SDK (cross compiler, kernel sources, kernel headers and rootfs) | ||
| + | * the RZ/G2 flash writer | ||
| ===== How to build the latest CIP Kernel for hihope-rzg2m ===== | ===== How to build the latest CIP Kernel for hihope-rzg2m ===== | ||
| Line 28: | Line 34: | ||
| $ git clone https://gitlab.com/cip-project/cip-kernel/cip-kernel-config.git | $ git clone https://gitlab.com/cip-project/cip-kernel/cip-kernel-config.git | ||
| $ cd kernel | $ cd kernel | ||
| - | $ cp ../cip-kernel-config/4.19.y-cip/arm64/renesas_defconfig arch/arm64/config/renesas_defconfig | + | $ cp ../cip-kernel-config/4.19.y-cip/arm64/renesas_defconfig arch/arm64/configs/renesas_defconfig |
| $ make renesas_defconfig | $ make renesas_defconfig | ||
| </code> | </code> | ||
| Line 41: | Line 47: | ||
| ==== Build Output ==== | ==== Build Output ==== | ||
| Output file locations: | Output file locations: | ||
| - | * Kernel: arch/arm64/boot/uImage | + | * Kernel: arch/arm64/boot/Image |
| * Device tree: arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dtb | * Device tree: arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dtb | ||
| * Device tree: arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dtb (when using expansion board) | * Device tree: arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dtb (when using expansion board) | ||
| Line 133: | Line 139: | ||
| ==== Build Output ==== | ==== Build Output ==== | ||
| Once the build is completed, the Kernel, device tree and RFS are located in $WORK/build/tmp/deploy/images/hihope-rzg2m. | Once the build is completed, the Kernel, device tree and RFS are located in $WORK/build/tmp/deploy/images/hihope-rzg2m. | ||
| + | |||
| + | ^ # ^ Filename ^ Description ^ Note ^ | ||
| + | | 1 | bootparam_sa0.srec | Loader (Boot parameter) | S-record format | | ||
| + | | 2 | bl2-hihope-rzg2m.srec | Loader (Trusted firmware-A BL2) | S-record format | | ||
| + | | 3 | cert_header_sa6.srec | Loader (Certification) | S-record format | | ||
| + | | 4 | bl31-hihope-rzg2m.srec | Trusted fimrware-A BL31 | S-record format | | ||
| + | | 5 | u-boot-elf-hihope-rzg2m.srec | U-Boot | symbolic link to the latest image, S-record format | | ||
| + | | 6 | Image | Linux kernel image | symbolic link to the latest image | | ||
| + | | 7 | r8a774a1-hihope-rzg2m.dtb | Device tree blob for hihope-rzg2m without the expansion board | symbolic link to the latest dtb | | ||
| + | | 8 | r8a774a1-hihope-rzg2m-ex.dtb | Device tree blob for hihope-rzg2m with the expansion board | symbolic link to the latest dtb | | ||
| Line 204: | Line 220: | ||
| $ $CC [your source code].c [optional FLAGs etc.] | $ $CC [your source code].c [optional FLAGs etc.] | ||
| </code> | </code> | ||
| + | |||
| + | ===== How to build the RZ/G2 flash writer ===== | ||
| + | |||
| + | This chapter describes how to build the RZ/G2 flash writer. | ||
| + | For further build options, please refer to [[https://github.com/renesas-rz/rzg2_flash_writer/blob/master/README.md|README of the RZ/G2 Flash Writer]]: | ||
| + | |||
| + | ==== Prepare the compiler ==== | ||
| + | |||
| + | Get cross compiler from linaro or setup the Yocto SDK. | ||
| + | |||
| + | Linaro toolchain: | ||
| + | |||
| + | <code> | ||
| + | cd ~/ | ||
| + | wget https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-elf/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz | ||
| + | tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz | ||
| + | </code> | ||
| + | |||
| + | Yocto SDK: | ||
| + | |||
| + | <code> | ||
| + | source /opt/poky/2.4.3/environment-setup-aarch64-poky-linux | ||
| + | </code> | ||
| + | |||
| + | ==== Prepare the source code ==== | ||
| + | |||
| + | Get the source code of RZ/G2 flash writer. | ||
| + | |||
| + | <code> | ||
| + | cd ~/ | ||
| + | git clone https://github.com/renesas-rz/rzg2_flash_writer.git | ||
| + | cd rzg2_flash_writer | ||
| + | git checkout -b v1.00 v1.00 | ||
| + | </code> | ||
| + | |||
| + | ==== Build the RZ/G2 flash writer ==== | ||
| + | |||
| + | S-record file will be built by the following command. | ||
| + | |||
| + | Linaro toolchain: | ||
| + | |||
| + | <code> | ||
| + | make clean | ||
| + | CROSS_COMPILE=~/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf/bin/aarch64-elf- make BOARD=HIHOPE | ||
| + | </code> | ||
| + | |||
| + | Yocto SDK: | ||
| + | |||
| + | <code> | ||
| + | make clean | ||
| + | make BOARD=HIHOPE | ||
| + | </code> | ||
| + | |||
| + | Output image will be available in the following directory. | ||
| + | |||
| + | * ./AArch64_output/AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_hihope.mot | ||
civilinfrastructureplatform/ciptesting/cipreferencehardware/hihope-rzg2m/hihope-rzg2mbuildinstructions.txt ยท Last modified: 2020/01/20 06:07 by kanechikay
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
