Table of Contents

Okidata FAQ

General Questions

Forum: Printers from other manufacturers

Where can I find a **table** of working Okidata printers?

http://www.openprinting.org/printer_list.cgi?make=Okidata

Related projects: oki4linux.

C7200

Which driver do I use?

The printer is compatible with PCL, so use the cljet5c driver from GhostScript.


ol1400w

Why does the **''oki4linux-2.1gst.tar.gz''** make install fail?

The Makefile is missing the command to create the directory.

mkdir -p /usr/local/man/man8/
make install

Why can't the printer even be found by the software?

Check BIOS settings. Changed the BIOS setting as suggested in the man page and can make a big difference.


Okipage4w

How do I setup an alternate CUPS backend?

This script works as a CUPS backend. Configure the printer as a raw device with this backend. This method doesn't require a PPD file.


if [ $# -eq 0 ]; then
echo "backend  \"Unknown\" \"gs sender\""
exit 0
fi

if [ $# -eq 6 ]; then
gs -q -dSAFER -dNOPAUSE -dBATCH -sDEVICE=oki4w -r300 -sPAPERSIZE=a4
-sOutputFile=/dev/lp0 $6
else
gs -q -dSAFER -dNOPAUSE -dBATCH -sDEVICE=oki4w -r300 -sPAPERSIZE=a4
-sOutputFile=/dev/lp0 -
fi

Okipage 8z

What are the steps to make this work?

These instructions use the oki4drv program, the oki4w driver, theoki4daemon, and the CUPS spooler. This was tested withRedhat v9. The test printer name is Okipage8z. Substitute the name as needed.

1. Create a suitable directory to contain all the source files.

mkdir /usr/local/src/oki4drv
cd /usr/local/src/oki4drv

2. Download the oki4linux-2.1gst.tar.gz file into your new oki4drv directory. The file can be found athttp://www.openprinting.org/download/printing/

3. tar -xvzf oki4linux-2.1gst.tar.gz

cd oki4linux/src


4. Edit the Makefile file, to suit a Redhat install, and change the install paths to: install: oki4drv

install -m4755 oki4drv /usr/local/sbin
install -m644 oki4drv.man /usr/share/man/man8/oki4drv.8

5.make

make install


6.cp oki4daemon /usr/local/sbin

7. Make sure that both oki4daemon and oki4drv are in the /usr/local/sbin/ directory.

ls /usr/local/sbin/


8. Change the permissions for the new printer device so that all users have full access:

chmod 777 /dev/oki4drv

You may want a more restrictive permissions setting, as this will allow anyone to do anything to your printer.

9. You can now read the man page for oki4drv:

man oki4drv


10. Create and paste the following /etc/rc.d/init.d/oki4daemon file:

 
 
 program:
 
 /dev/oki4daemon \
 
 DAEMON=/usr/local/sbin/oki4daemon
 program=oki4daemon
 RETVAL=0
 
 [ -f /usr/local/sbin/oki4drv ]    || exit 0
 [ -f /usr/local/sbin/oki4daemon ] || exit 0
 
 if [ -f /etc/init.d/functions ] ; then
 . /etc/init.d/functions
 elif [ -f /etc/rc.d/init.d/functions ] ; then
 . /etc/rc.d/init.d/functions
 else
 exit 0
 fi
 
 start () {
 echo -n $"Starting $program: "
 daemon $DAEMON     # any arguments?
 RETVAL=$?
 echo
 [ $RETVAL = 0 ] && touch /var/lock/subsys/oki4daemon
 return $RETVAL
 }
 
 stop () {
 echo -n "Stopping $program: "
 killproc $DAEMON
 RETVAL=$?
 echo
 [ $RETVAL = 0 ] && rm -f /var/lock/subsys/oki4daemon
 }
 
 case "$1" in
 start)
 start	
 ;;
 stop)
 stop
 ;;
 restart)
 stop
 start
 ;;
 status)
 status $DAEMON
 ;;
 *) echo "Usage: /etc/init.d/oki4daemon {start|stop|restart|status}" exit 1 esac
 
 exit $RETVAL

11. The following adds the startup scripts to the rc.d files:

chkconfig --add oki4daemon


12. To use the oki4daemon:

/etc/local/rc.d/init.d/oki4daemon start

or:

service oki4daemon start

To check the running status of the oki4daemon:

service oki4daemon status

You can also use the stop and restart options Make sure the CUPS service is also running:

service cups status


13. You might want to reboot now, just to test that the rc.d scripts will automatically start the oki4daemon. Incremental testing is always good practice. You should notice the oki4daemon start message appear near the end of the bootup messages, and before the CUPS service starts. After the reboot:

service oki4daemon status
service cups status

14. The following command tests that the oki4drv driver is working:

oki4drv /usr/share/cups/data/testprint.ps

The next command tests that oki4drv and oki4daemon are both working together

cat /usr/share/cups/data/testprint.ps > /dev/oki4drv


15. To get CUPS, and the Print Manager, and Linux applications to send print jobs through the oki4w driver, edit the /etc/cups/printers.conf file, and change the DeviceURI line to:

DeviceURI file: /dev/oki4drv

Note: all the information available mentions that the device should be/dev/null. This is correct only if you are using the oki4drv driver by itself. However we are also going to use the oki4daemon to monitor the /dev/oki4drv pipe, and so the setting must be /dev/oki4drv. It is the only way your print jobs are going to get to the pipe.

16. Find the PPD (Postscript Printer Description) file for your printer: cnd(find / -name *.ppd) I found mine in /etc/cups/ppd/Okipage8z.ppd If you cannot find your printer's PPD file, you can search for and download it fromhttp://www.openprinting.org/printer_list.cgi

17. Copy your printer's PPD file to a location where CUPS expects to find it. You should change its name to that of your printer name.

cp /etc/cups/ppd/?????????.ppd /usr/share/cups/model/Okipage8z.ppd


18. Gzip the PPD file:

cd /usr/share/cups/model
gzip Okipage8z
cd /root

19. Restart the CUPS service:

service cups restart


20. Now you can use any of your Linux applications to print a test page.

21. It is almost certain that your print area will be wrong. I used a utility called alignmargins and a special margin alignment file called align.ps. Both are available at http://www.openprinting.org/download/printing/ . Run the alignmargins program, which will print the alignment page from thealign.ps file.

./alignmargins

. You will need a ruler to measure the printout margins and a calculator to do some simple calculations, which you will be asked to input into the alignmargins program.

22. You should now have a fully functioning Linux Okipage 8z printer. Good luck and enjoy your inexpensive, quality printouts. It was worth all the effort.


Where can I find a Mac OSX driver?

See the entry for 17 October 2002 (17/10/2002).http://www.comworth.co.nz/web/content.asp?cont=notices


ML 393

Which drivers work?

The lq850 driver works at a really high resolution. Its extremely slow. At lower resolutions it doesn't seem to work at all. The Epson 24 pin series driver works great for both the Oki 393 and Oki 395.